HYDROCHLORIC ACID BT 31% 30 LTRS #F050080010101

Chemicals & Water Treatment

HYDROCHLORIC ACID BT 31% 30 LTRS #F050080010101

HYDROCHLORIC ACID BT 31% 30 LTRS #F050080010101Chemicals & Water Treatment
In Stock & Available

HYDROCHLORIC ACID BT 31% 30 LTRS #F050080010101

Hydrochloric Acid BT 31% 30 Ltrs – High‑Strength pH and Alkalinity Adjuster for Pools

Adjust your pool water chemistry quickly and effectively with Hydrochloric Acid BT 31% 30 Ltrs (F050080010101), a concentrated liquid acid used to lower pH and total alkalinity in swimming pools. This strong 31% solution is a powerful pool supply that helps correct water that has become too alkaline, keeping your pool equipment and water filtration system operating efficiently. When used carefully and correctly, it plays a key role in maintaining clear, comfortable, and well‑balanced water.

Technical Specifications

Product NameHydrochloric Acid BT 31% 30 Ltrs – F050080010101
CategoryChemicals
BrandBT Super
Concentration31% hydrochloric acid
FormLiquid (muriatic‑type acid)
Size30 litres
FunctionLower pH and reduce total alkalinity in pool water
ApplicationResidential and commercial swimming pools
RoleHigh‑strength pool supply for water balance and equipment protection

Key Features & Benefits

Hydrochloric Acid BT 31% rapidly lowers elevated pH and total alkalinity, bringing the water into the recommended range (typically 7.2–7.8 pH). This improves the effectiveness of pool chlorine and other sanitizers, reduces scaling on tiles and metal parts, and supports clearer, more comfortable water for swimmers.
By keeping pH and alkalinity in balance, this acid helps protect pool equipment such as pumps, filters, and heaters from corrosion and scale buildup. The water filtration system runs more smoothly when water chemistry is stable, reducing the load on chemicals and mechanical components.

Usage Tips

  • Always test pH and alkalinity before adding acid and dose gradually, following local guidelines or product instructions for your pool volume.
  • Pre‑dilute the recommended amount in a large plastic bucket of water, then pour the solution slowly near the deep end with the pump running to ensure even distribution.
  • Never add the acid directly into the skimmer or close to fixtures, and avoid contact with pool surfaces before the acid is fully diluted.
  • Wait several hours and re‑test before applying additional doses.

Care & Storage Instructions

  • Store the 30‑ltr container upright in a cool, dry, shaded area, away from heat, direct sunlight, and incompatible materials.
  • Avoid contamination by not using the same container for other chemicals and always rinse measuring tools with fresh water after use.
  • Regularly inspect the packaging for leaks or damage and replace if needed.
  • Use Hydrochloric Acid BT 31% 30 Ltrs as a precise, high‑strength pool supply to correct high pH and alkalinity and protect your pool equipment. When combined with proper testing procedures, your water filtration system, and careful pool supplies use, this acid helps keep your pool clean, balanced, and enjoyable all season long.